Elegoo PLA+ filament Grey 1.75 mm is a modified PLA for makers who want tougher prints without losing the easy handling of standard PLA. It is made from NatureWorks 4032D biopolymer. Compared with regular PLA, it offers improved toughness and tensile strength, so parts are less brittle and less prone to warping. Neutral grey brings out fine details and suits prototypes, technical parts and models to be painted.
Why choose it
- Tougher than standard PLA: higher tensile strength and reduced brittleness are useful for objects that need to withstand some stress.
- NatureWorks 4032D base: an eco-friendly biopolymer that gives the material high strength and good ductility.
- Easy to print: handles like a standard PLA, at a moderate printing temperature of 205–230 °C.
- Excellent layer adhesion: layers bond well for solid, compact parts.
- Smooth, glossy surface: an attractive finish straight off the print bed.
- AMS compatible: listed by the manufacturer as compatible with the Bambu Lab AMS.
Technical specifications
- Material: PLA+ (modified PLA, NatureWorks 4032D base)
- Brand: Elegoo
- Colour: Grey
- Diameter: 1.75 mm
- Net weight: 1 kg
- Format: spool
- Printing temperature: 205–230 °C
- Bed temperature: 50–65 °C
- Finish: smooth and glossy
- Compatibility: Bambu Lab AMS
- Manufacturer code: 50.203.0050
Printing tips
- Start around the middle of the 205–230 °C range, then adjust to suit the print speed and profile.
- Set the bed to 50–65 °C. Keep it clean and levelled for good first-layer adhesion.
- Store the spool in a sealed bag with desiccant when not in use, as PLA absorbs moisture over time.
- Secure the loose filament end after each use so it does not unwind and tangle.
- When printing from an AMS, check that the spool turns freely in its slot.
Compatibility
FDM 3D printers using 1.75 mm filament. The manufacturer lists it as compatible with the Bambu Lab AMS multi-material system.
Package contents
- 1 spool of Elegoo PLA+ filament, Grey, 1 kg, 1.75 mm
Print results
Print quality depends on the printer and its calibration, the profiles and settings used, how the filament is stored and the user's experience. The temperatures and parameters given are the manufacturer's starting values: tests and adjustments are the buyer's responsibility and at the buyer's expense. Failed prints or material used up because of unsuitable settings or hardware are not product defects.
Returns and withdrawal
The filament is vacuum-sealed because it absorbs moisture from the air. The right of withdrawal (14 days, consumers only) applies when the spool is returned with its vacuum packaging intact and sealed. An opened package can no longer be sold as new: in that case the refund is reduced by the loss in value of the product (Art. 57(2) of the Italian Consumer Code). Purchases made with a VAT number are not eligible for withdrawal. The legal warranty for defective products always applies.
Nota sulle fotoLe foto sono scattate da noi o fornite dal produttore e verificate sul prodotto reale. Il prodotto ricevuto può differire nell'aspetto (colore, marcature, confezione o lotto), mantenendo funzioni e caratteristiche tecniche dichiarate dal produttore.
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent