Elegoo Rapid PLA+ filament Red 1.75 mm is a PLA+ developed to get the most from the fastest FDM printers, at up to 600 mm/s. It is the right choice for quick results with strong parts and attractive surfaces. The vivid red is perfect for eye-catching objects, gadgets and components that need to stand out.
Why choose it
- Speeds up to 600 mm/s: optimised flow cuts print times considerably.
- PLA+ strength: improved toughness and solidity for more demanding use of parts.
- High flexural modulus and good elongation: prints are less brittle and less prone to cracking.
- Smooth surface: models come out even, with barely noticeable layer lines.
- Bambu Lab AMS compatible: the manufacturer lists it for use with the AMS multi-material system.
Technical specifications
- Material: PLA+ (Rapid PLA+)
- Brand: Elegoo
- Colour: Red
- Diameter: 1.75 mm
- Net weight: 1 kg
- Format: spool
- Printing temperature: 200–230 °C
- Bed temperature: 40–60 °C
- Print speed: up to 600 mm/s
- Compatibility: Bambu Lab AMS
- Manufacturer code: 50.203.0119
Printing tips
- Print with the nozzle at 200–230 °C and the bed at 40–60 °C. Then fine-tune the parameters with a test.
- For the fastest speeds, choose temperatures towards the upper end of the range. Also make sure the hotend delivers sufficient flow.
- Clean the build plate thoroughly to ensure good first-layer adhesion.
- Keep the filament away from moisture, in a resealable bag with desiccant.
Compatibility
FDM printers using 1.75 mm filament, especially high-speed models. According to the manufacturer, it is compatible with Bambu Lab AMS.
Package contents
- 1 spool of Elegoo Rapid PLA+ Red filament, 1 kg
Print results
Print quality depends on the printer and its calibration, the profiles and settings used, how the filament is stored and the user's experience. The temperatures and parameters given are the manufacturer's starting values: tests and adjustments are the buyer's responsibility and at the buyer's expense. Failed prints or material used up because of unsuitable settings or hardware are not product defects.
Returns and withdrawal
The filament is vacuum-sealed because it absorbs moisture from the air. The right of withdrawal (14 days, consumers only) applies when the spool is returned with its vacuum packaging intact and sealed. An opened package can no longer be sold as new: in that case the refund is reduced by the loss in value of the product (Art. 57(2) of the Italian Consumer Code). Purchases made with a VAT number are not eligible for withdrawal. The legal warranty for defective products always applies.
Nota sulle fotoLe foto sono scattate da noi o fornite dal produttore e verificate sul prodotto reale. Il prodotto ricevuto può differire nell'aspetto (colore, marcature, confezione o lotto), mantenendo funzioni e caratteristiche tecniche dichiarate dal produttore.
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent