Elegoo PLA filament Orange 1.75 mm is a PLA designed for newcomers to 3D printing and for anyone looking for a simple, dependable material. It melts at a low temperature, barely deforms and keeps a consistent diameter for precise, even prints.
Why choose it
- Ideal for beginners: the low melting temperature and easy processing make getting started with 3D printing more straightforward.
- Minimal warping: parts show little tendency to lift from the bed or distort during printing.
- Precise diameter: 1.75 mm with a ±0.02 mm tolerance, checked continuously during production using several test methods.
- Dried and vacuum-sealed: every spool is dried once more before vacuum packing. This removes residual moisture and limits bubbles and clogs.
- Hand-checked winding: reduces the risk of filament breakage and supports consistent extrusion.
- Glossy surface, odourless printing: parts come out shiny and printing produces no odour.
Technical specifications
- Material: PLA (polylactic acid)
- Brand: Elegoo
- Colour: Orange
- Finish: glossy
- Diameter: 1.75 mm
- Tolerance: ±0.02 mm
- Net weight: 1 kg
- Format: on spool, vacuum-sealed
- Printing temperature: 190–230 °C
- Bed temperature: 0–40 °C
- Compatibility: Bambu Lab AMS, as stated by the manufacturer
- Manufacturer code: 50.203.0067
Printing tips
- Set a temperature between 190 and 230 °C and fine-tune it with a test print.
- Keep the bed between 0 and 40 °C; printing on an unheated bed is also possible. Keep it clean and well levelled for good first-layer adhesion.
- Store the spool in a dry place and reseal it in a bag with desiccant after use.
- Before loading the spool into an AMS, check that its format and size suit the unit in use.
Compatibility
FDM 3D printers that use 1.75 mm filament. The manufacturer states compatibility with the Bambu Lab AMS multi-material system.
Package contents
- 1 vacuum-sealed spool of Elegoo PLA filament, 1 kg
Print results
Print quality depends on the printer and its calibration, the profiles and settings used, how the filament is stored and the user's experience. The temperatures and parameters given are the manufacturer's starting values: tests and adjustments are the buyer's responsibility and at the buyer's expense. Failed prints or material used up because of unsuitable settings or hardware are not product defects.
Returns and withdrawal
The filament is vacuum-sealed because it absorbs moisture from the air. The right of withdrawal (14 days, consumers only) applies when the spool is returned with its vacuum packaging intact and sealed. An opened package can no longer be sold as new: in that case the refund is reduced by the loss in value of the product (Art. 57(2) of the Italian Consumer Code). Purchases made with a VAT number are not eligible for withdrawal. The legal warranty for defective products always applies.
Nota sulle fotoLe foto sono scattate da noi o fornite dal produttore e verificate sul prodotto reale. Il prodotto ricevuto può differire nell'aspetto (colore, marcature, confezione o lotto), mantenendo funzioni e caratteristiche tecniche dichiarate dal produttore.
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent