The eSUN PLA+ filament Orange 1.75 mm is a PLA with enhanced physical properties, for makers who want sturdier parts and simple printing. It is stronger and tougher than ordinary PLA, so it is harder to break. The vivid orange makes gadgets, signage and components easy to spot at a glance.
Why choose it
- Higher strength and toughness: the properties are improved over standard PLA, so it also suits parts that are put under stress.
- Excellent layer adhesion: layers bond well for compact, reliable prints.
- Broad compatibility: works on most FDM 3D printers.
- No heated bed required: it can be printed without a heated bed.
- Three formats: standard spool, eSpool+ spool or refill without a spool.
- Plant-based, vacuum-sealed: made from starch-based raw materials from renewable sources. It arrives sealed against dust, dirt and moisture.
Technical specifications
- Material: PLA+ (enhanced PLA)
- Brand: eSUN
- Colour: Orange
- Diameter: 1.75 mm
- Net weight: 1 kg (1,000 g) for every variant
- Format: spool, eSpool+ spool or refill (no spool), depending on the variant
- Recommended nozzle temperature: 210–230 °C (about 20 °C higher than standard PLA)
- Heated bed temperature: not required; if available, 45–60 °C
- Manufacturer code: PLA+175O1P1 (spool), PLA+175O1RS1 (eSpool+), PLA+175O1R1 (refill)
- Documentation: technical data sheet and RoHS compliance declaration
Printing tips
- Use a slightly higher nozzle temperature than for ordinary PLA, staying within 210–230 °C.
- If the printer has a heated bed, set it to 45–60 °C for a more stable first layer.
- Mount the refill on a suitable reusable spool or holder.
- Before long idle periods (over a few days), unload the filament from the nozzle.
- Store the filament in its original vacuum bag or a filament box, somewhere cool and dry. With spooled filament, secure the loose end in the holes on the spool rim so it does not tangle.
Compatibility
FDM 3D printers that use 1.75 mm filament.
Package contents
- 1 kg of PLA+ filament, vacuum-sealed. It comes on a spool, on an eSpool+ spool or as a refill without a spool, depending on the selected variant.
Print results
Print quality depends on the printer and its calibration, the profiles and settings used, how the filament is stored and the user's experience. The temperatures and parameters given are the manufacturer's starting values: tests and adjustments are the buyer's responsibility and at the buyer's expense. Failed prints or material used up because of unsuitable settings or hardware are not product defects.
Returns and withdrawal
The filament is vacuum-sealed because it absorbs moisture from the air. The right of withdrawal (14 days, consumers only) applies when the spool is returned with its vacuum packaging intact and sealed. An opened package can no longer be sold as new: in that case the refund is reduced by the loss in value of the product (Art. 57(2) of the Italian Consumer Code). Purchases made with a VAT number are not eligible for withdrawal. The legal warranty for defective products always applies.
Nota sulle fotoLe foto sono scattate da noi o fornite dal produttore e verificate sul prodotto reale. Il prodotto ricevuto può differire nell'aspetto (colore, marcature, confezione o lotto), mantenendo funzioni e caratteristiche tecniche dichiarate dal produttore.
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent