eSUN PLA Basic filament Fire Engine Red 1.75 mm is a modified PLA enhanced with a special additive that improves melt flow, designed for high-speed printing without sacrificing print quality. Easy to print and resistant to warping, it is a versatile choice for decorative pieces, concept models and prototypes in a vivid red.
Why choose it
- Built for high speed: the modified formulation improves flowability and supports faster print profiles.
- Easy to print: straightforward to handle, suitable for beginners and everyday printing.
- Low warping: parts stay flat on the bed and keep their shape.
- Good print quality: clean, consistent results for everyday printing.
- Three formats: standard spool, eSpool+ spool or spool-free refill, always 1 kg.
Technical specifications
- Material: modified PLA (PLA Basic)
- Brand: eSUN
- Colour: Fire Engine Red
- Diameter: 1.75 mm
- Net weight: 1 kg
- Format: spool, eSpool+ spool or refill without spool, depending on the variant
- Recommended nozzle temperature: 210–230 °C
- Recommended bed temperature: 45–60 °C
- Compatibility: 1.75 mm FDM printers; Bambu Lab AMS (subject to a manufacturer's note, check the format)
- Manufacturer code: PLA-Basic175O-FR1P1 (spool), PLA-Basic175O-FR1RS1 (eSpool+ spool), PLA-Basic175O-FR1R1 (refill)
- Applications: decorations, concept models, rapid prototyping
Printing tips
- Start at the lower end of the 210–230 °C range. When printing at high speed, raise the temperature gradually.
- Keep the bed between 45 and 60 °C, clean and levelled, for good first-layer adhesion.
- When not in use, store the filament dry in a sealed bag or a container with desiccant.
- Fit the refill onto a compatible reusable spool before use.
Compatibility
FDM 3D printers using 1.75 mm filament. The manufacturer also lists compatibility with the Bambu Lab AMS, subject to a note. Check that the chosen format is suitable for the AMS before use.
Package contents
- 1 kg of 1.75 mm PLA Basic filament, on a standard spool, on an eSpool+ spool or as a spool-free refill, depending on the variant selected
Print results
Print quality depends on the printer and its calibration, the profiles and settings used, how the filament is stored and the user's experience. The temperatures and parameters given are the manufacturer's starting values: tests and adjustments are the buyer's responsibility and at the buyer's expense. Failed prints or material used up because of unsuitable settings or hardware are not product defects.
Returns and withdrawal
The filament is vacuum-sealed because it absorbs moisture from the air. The right of withdrawal (14 days, consumers only) applies when the spool is returned with its vacuum packaging intact and sealed. An opened package can no longer be sold as new: in that case the refund is reduced by the loss in value of the product (Art. 57(2) of the Italian Consumer Code). Purchases made with a VAT number are not eligible for withdrawal. The legal warranty for defective products always applies.
Nota sulle fotoLe foto sono scattate da noi o fornite dal produttore e verificate sul prodotto reale. Il prodotto ricevuto può differire nell'aspetto (colore, marcature, confezione o lotto), mantenendo funzioni e caratteristiche tecniche dichiarate dal produttore.
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent