Bambu Lab PLA Basic Gradient filament Solar Breeze 1.75 mm turns an ordinary PLA print into an object with shifting colours: two shades alternate along the strand with soft, natural transitions. It suits decorative items, vases, figures and original gifts, with a multi-colour effect from a single spool.
Why choose it
- Soft two-tone effect: the two shades blend without hard breaks and add movement to surfaces.
- Gradual transition: the colour shifts roughly every 8–10 metres of filament.
- Soft finish: a refined appearance that brings out the gradient.
- Easy to print: as straightforward to work with as PLA Basic.
- RFID recognition: print parameters are stored on the tag and the AMS applies them automatically.
Technical specifications
- Material: PLA (PLA Basic Gradient line)
- Brand: Bambu Lab
- Colour: Solar Breeze (two-tone gradient)
- Colour transition: approximately every 8–10 m
- Diameter: 1.75 mm
- Net weight: 1 kg
- Format: reusable spool (Basic Reusable Spool)
- Recommended nozzle temperature: 190–230 °C
- Recommended bed temperature: 35–45 °C
- Compatibility: Bambu Lab AMS
- Manufacturer code: A00-M1-1.75-1000-SPL
Printing tips
- As the colour changes roughly every 8–10 metres, the gradient shows best on medium and large objects; very small parts may come out in a single shade.
- Set the nozzle to 190–230 °C and the bed to 35–45 °C, or use the profile the AMS reads from the RFID tag.
- Single-wall vases and figures printed in one piece show off the effect best.
- Store the filament dry, in a sealed bag or a container with desiccant.
Compatibility
FDM printers using 1.75 mm filament. Compatible with the Bambu Lab AMS multi-material system, which identifies the material via RFID.
Package contents
- 1 reusable spool (Basic Reusable Spool) with 1 kg of filament
Print results
Print quality depends on the printer and its calibration, the profiles and settings used, how the filament is stored and the user's experience. The temperatures and parameters given are the manufacturer's starting values: tests and adjustments are the buyer's responsibility and at the buyer's expense. Failed prints or material used up because of unsuitable settings or hardware are not product defects.
Returns and withdrawal
The filament is vacuum-sealed because it absorbs moisture from the air. The right of withdrawal (14 days, consumers only) applies when the spool is returned with its vacuum packaging intact and sealed. An opened package can no longer be sold as new: in that case the refund is reduced by the loss in value of the product (Art. 57(2) of the Italian Consumer Code). Purchases made with a VAT number are not eligible for withdrawal. The legal warranty for defective products always applies.
Nota sulle fotoLe foto sono scattate da noi o fornite dal produttore e verificate sul prodotto reale. Il prodotto ricevuto può differire nell'aspetto (colore, marcature, confezione o lotto), mantenendo funzioni e caratteristiche tecniche dichiarate dal produttore.
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent