eSUN PLA+ filament Dark Blue 1.75 mm offers a deep, elegant blue together with the improved mechanical properties of PLA+. It is stronger and tougher than standard PLA, so parts are less likely to snap. It suits both functional components and display models.
Why choose it
- Tougher than standard PLA: greater resistance to breaking.
- Well-bonded layers: excellent layer adhesion helps create solid parts.
- Wide compatibility: works with most FDM 3D printers.
- Plant-based material: derived from plant starch, a renewable resource.
- Vacuum-protected: sealed packaging keeps out dust, dirt and moisture.
Technical specifications
- Material: PLA+ (enhanced PLA)
- Brand: eSUN
- Colour: Dark Blue
- Diameter: 1.75 mm
- Net weight: 1 kg
- Format: standard spool, eSpool+ spool or refill without spool, depending on the chosen variant
- Recommended nozzle temperature: 210–230 °C
- Bed temperature: 45–60 °C (heated bed not required)
- Manufacturer code: PLA+175D-U1P1 (spool), PLA+175D-U1RS1 (eSpool+), PLA+175D-U1R1 (refill)
Printing tips
- Print at 210–230 °C: PLA+ runs about 20 °C hotter than standard PLA.
- A heated bed is not essential; if available, set it to 45–60 °C.
- Before idle periods of more than a few days, unload the filament from the nozzle.
- Store the filament in its original vacuum bag or a dedicated box, in a cool, dry place.
- Lock the filament end in the side holes of the spool to avoid tangles.
Compatibility
FDM 3D printers using 1.75 mm filament. According to the manufacturer, PLA+ is compatible with most FDM printers. The refill version comes without a spool and must be mounted on a suitable reusable spool.
Print results
Print quality depends on the printer and its calibration, the profiles and settings used, how the filament is stored and the user's experience. The temperatures and parameters given are the manufacturer's starting values: tests and adjustments are the buyer's responsibility and at the buyer's expense. Failed prints or material used up because of unsuitable settings or hardware are not product defects.
Returns and withdrawal
The filament is vacuum-sealed because it absorbs moisture from the air. The right of withdrawal (14 days, consumers only) applies when the spool is returned with its vacuum packaging intact and sealed. An opened package can no longer be sold as new: in that case the refund is reduced by the loss in value of the product (Art. 57(2) of the Italian Consumer Code). Purchases made with a VAT number are not eligible for withdrawal. The legal warranty for defective products always applies.
Nota sulle fotoLe foto sono scattate da noi o fornite dal produttore e verificate sul prodotto reale. Il prodotto ricevuto può differire nell'aspetto (colore, marcature, confezione o lotto), mantenendo funzioni e caratteristiche tecniche dichiarate dal produttore.
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent