The eSUN PLA+ filament Matcha Green 1.75 mm combines the easy printing of PLA with extra robustness. It is stronger and tougher than standard PLA, so parts are less likely to snap. The soft, natural matcha green tint suits both decorative and functional objects.
Why choose it
- Tougher than standard PLA: improved physical properties give higher strength and toughness.
- Strong layer bonding: excellent inter-layer adhesion helps produce solid, consistent parts.
- Works with most FDM printers: suitable for the vast majority of filament-based 3D printers.
- Plant-based: made from starch-rich raw materials sourced from renewable plant resources.
- Protected until use: vacuum-sealed packaging keeps out dust, dirt and moisture.
Technical specifications
- Material: PLA+ (enhanced PLA)
- Brand: eSUN
- Colour: Matcha Green
- Diameter: 1.75 mm
- Net weight: 1 kg (1,000 g)
- Format: spool
- Recommended nozzle temperature: 210–230 °C
- Recommended heated bed temperature: 45–60 °C
- Manufacturer code: PLA+175O-MC1P1
- Documentation: technical data sheet and RoHS compliance declaration
Printing tips
- Start in the middle of the 210–230 °C range and fine-tune for the printer and print speed.
- When using a heated bed, set it to 45–60 °C to help first-layer adhesion.
- If the printer will stand idle for more than a few days, unload the filament from the nozzle.
- After printing, return the spool to its original vacuum bag or a filament storage box and keep it in a cool, dry place.
- Thread the loose end through the holes on the spool rim so it does not unwind or tangle.
Compatibility
FDM 3D printers that use 1.75 mm filament.
Package contents
- 1 spool of PLA+ filament, 1 kg, vacuum-sealed
Print results
Print quality depends on the printer and its calibration, the profiles and settings used, how the filament is stored and the user's experience. The temperatures and parameters given are the manufacturer's starting values: tests and adjustments are the buyer's responsibility and at the buyer's expense. Failed prints or material used up because of unsuitable settings or hardware are not product defects.
Returns and withdrawal
The filament is vacuum-sealed because it absorbs moisture from the air. The right of withdrawal (14 days, consumers only) applies when the spool is returned with its vacuum packaging intact and sealed. An opened package can no longer be sold as new: in that case the refund is reduced by the loss in value of the product (Art. 57(2) of the Italian Consumer Code). Purchases made with a VAT number are not eligible for withdrawal. The legal warranty for defective products always applies.
Nota sulle fotoLe foto sono scattate da noi o fornite dal produttore e verificate sul prodotto reale. Il prodotto ricevuto può differire nell'aspetto (colore, marcature, confezione o lotto), mantenendo funzioni e caratteristiche tecniche dichiarate dal produttore.
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent