Bambu Lab PLA-CF filament Iris Purple 1.75 mm is a PLA reinforced with carbon fibre. It is stronger and stiffer than standard PLA and remains easy to print. Designed for technical and functional parts, it combines improved mechanical performance with an elegant matte purple finish.
Why choose it
- Carbon fibre reinforcement: greater strength and stiffness than standard PLA, for components that have to withstand stress.
- Matte finish: the surface hides layer lines effectively for a clean, professional look.
- Low shrinkage and warping: dimensions stay stable and the risk of warping is kept low.
- Suited to high speeds: prints quickly without the risk of clogging.
- Ready-made settings via RFID: print settings are stored in the RFID chip and read automatically by the AMS.
Technical specifications
- Material: carbon fibre reinforced PLA (PLA-CF)
- Brand: Bambu Lab
- Colour: Iris Purple
- Finish: matte
- Diameter: 1.75 mm
- Net weight: 1 kg
- Spool: Basic Reusable Spool
- Printing temperature: 210–240 °C
- Bed temperature: 35–45 °C
- Required nozzle: wear-resistant, minimum diameter 0.4 mm
- Print settings: stored in the RFID chip
- Manufacturer code: A50-P7-1.75-1000-SPL
Printing tips
- Dry the filament before use, as the manufacturer recommends.
- Fit a wear-resistant nozzle, such as hardened steel, with a diameter of at least 0.4 mm, because carbon fibres are abrasive.
- With the AMS the settings are applied automatically. Otherwise, start within the temperature ranges given.
- When not in use, keep the spool dry in a sealed bag with desiccant.
Compatibility
FDM printers using 1.75 mm filament and fitted with a wear-resistant nozzle. Compatible with Bambu Lab AMS, which reads the settings automatically from the RFID chip.
Package contents
- 1 Basic Reusable Spool with 1 kg of filament
Material for experienced users
- Abrasive material (fibre, mineral or glow-in-the-dark fillers): a hardened steel nozzle or other wear-resistant nozzle is required; a brass nozzle wears out within a few hours.
Print results
Print quality depends on the printer and its calibration, the profiles and settings used, how the filament is stored and the user's experience. The temperatures and parameters given are the manufacturer's starting values: tests and adjustments are the buyer's responsibility and at the buyer's expense. Failed prints or material used up because of unsuitable settings or hardware are not product defects.
Returns and withdrawal
The filament is vacuum-sealed because it absorbs moisture from the air. The right of withdrawal (14 days, consumers only) applies when the spool is returned with its vacuum packaging intact and sealed. An opened package can no longer be sold as new: in that case the refund is reduced by the loss in value of the product (Art. 57(2) of the Italian Consumer Code). Purchases made with a VAT number are not eligible for withdrawal. The legal warranty for defective products always applies.
Nota sulle fotoLe foto sono scattate da noi o fornite dal produttore e verificate sul prodotto reale. Il prodotto ricevuto può differire nell'aspetto (colore, marcature, confezione o lotto), mantenendo funzioni e caratteristiche tecniche dichiarate dal produttore.
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent