Bambu Lab ABS-GF filament White 1.75 mm is a glass-fibre reinforced ABS for technical parts that need stiffness, strength and dimensional accuracy. Matt white gives a clean look, suited to mechanical components as well as household and decorative items. The smooth surface softens layer lines.
Why choose it
- Glass fibre for extra stiffness: parts better withstand bending and loads.
- Dimensional stability: useful for assembly parts that must hold their dimensions.
- Smooth matt finish: layer lines are less noticeable.
- Long-lasting: withstands water, wear and high temperatures.
- Settings via RFID: print parameters are read automatically.
Technical specifications
- Material: glass-fibre reinforced ABS (ABS-GF)
- Brand: Bambu Lab
- Colour: White
- Finish: matt
- Diameter: 1.75 mm
- Net weight: 1 kg
- Format: High Temperature Reusable Spool
- Recommended nozzle temperature: 240–270 °C
- Recommended bed temperature: 80–100 °C
- Compatibility: Bambu Lab AMS
- Manufacturer code: B50-W0-1.75-1000-SPL
Printing tips
- Dry the material before printing, as indicated by the manufacturer.
- Print in an enclosed printer or with an enclosure.
- A hardened steel nozzle is recommended, as glass fibres are abrasive.
- Stay within the stated temperature ranges and ventilate the room.
- Store the spool dry, in a sealed container with desiccant.
Compatibility
FDM printers using 1.75 mm filament that can process ABS at the stated temperatures and have a nozzle suited to filled filaments. The filament is compatible with the Bambu Lab AMS.
Package contents
- 1 spool of White ABS-GF filament, 1 kg, on a high-temperature reusable spool
Material for experienced users
- Abrasive material (fibre, mineral or glow-in-the-dark fillers): a hardened steel nozzle or other wear-resistant nozzle is required; a brass nozzle wears out within a few hours.
- Material that requires an enclosed printer (heated chamber) to prevent warping and cracking, a high-temperature heated bed and a well-ventilated room while printing.
Print results
Print quality depends on the printer and its calibration, the profiles and settings used, how the filament is stored and the user's experience. The temperatures and parameters given are the manufacturer's starting values: tests and adjustments are the buyer's responsibility and at the buyer's expense. Failed prints or material used up because of unsuitable settings or hardware are not product defects.
Returns and withdrawal
The filament is vacuum-sealed because it absorbs moisture from the air. The right of withdrawal (14 days, consumers only) applies when the spool is returned with its vacuum packaging intact and sealed. An opened package can no longer be sold as new: in that case the refund is reduced by the loss in value of the product (Art. 57(2) of the Italian Consumer Code). Purchases made with a VAT number are not eligible for withdrawal. The legal warranty for defective products always applies.
Nota sulle fotoLe foto sono scattate da noi o fornite dal produttore e verificate sul prodotto reale. Il prodotto ricevuto può differire nell'aspetto (colore, marcature, confezione o lotto), mantenendo funzioni e caratteristiche tecniche dichiarate dal produttore.
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent