List of products by brand Pine64
The Pinecil V2, PINE64's pocket soldering iron with a RISC-V processor and open source firmware, powered over USB-C or a DC jack.
PINE64 designs ARM and RISC-V devices made to be used and programmed, and says it lets free and open source principles guide its business.
The Pinecil V2
In the Soldering Irons & Stations category you'll find the Pinecil V2, a portable soldering iron: you set the temperature on the handle, between 100 and 400 °C, with the buttons and the small OLED display. With the included ST-B2 tip it weighs 28 g. The processor is a Bouffalo BL706 RISC-V chip, and the firmware is IronOS, open source.
Which power supply?
The power supply and cable are not included. The Pinecil runs from its USB-C port with a Power Delivery or Quick Charge 3.0 supply at 12 to 20 V and 3 A, or from the DC5525 jack at 12 to 24 V and at least 3 A, one port at a time. PINE64 states it reaches 88 W at 24 V. On a 5 V USB port, like a laptop's, it turns on but won't heat. The PINE64 wiki recommends a 65 W, 20 V USB-C PD charger, and warns that a 5.5 × 2.1 mm plug will break the 5.5 × 2.5 mm connector.