Foto nostre o del produttore, verificate sul prodotto reale. L'aspetto può variare, funzioni e caratteristiche tecniche no.
JTAG-SMT2 surface-mount programming module for AMD FPGAs, micro-AB USB – Digilent 410-251
Compact surface-mount module for JTAG programming and debugging of AMD FPGAs, complete with a micro-AB USB connector. It is soldered onto the target board like any other component.
Key features
- Complete, self-contained JTAG programming and debugging solution for AMD FPGAs in a small SMD module, reflow-soldered like any other component
- Accessible directly from AMD tools, including iMPACT, ChipScope and EDK
- Compatible with IEEE 1149.7-2009 Class T0 to Class T4, in both 2-wire and 4-wire modes
- Three general-purpose I/O pins (GPIO0–GPIO2); a GPIO pin allows debugging software to reset the processor core of AMD Zynq platforms
- SPI programming: modes 0 and 2 up to 30 Mbit/s, modes 1 and 3 up to 2 Mbit/s
- JTAG bus can be shared with other devices: signals are held at high impedance except during programming
- Fully supported by Digilent Adept software and Adept SDK
- Not required with Digilent FPGA boards, which already integrate the programming circuitry
Technical specifications
- Function: JTAG programming and debugging, SPI programming
- Host interface: High-Speed USB 2.0, micro-AB connector
- JTAG/SPI bus speed: up to 30 Mbit/s, user-settable frequency
- Main power supply: 3.3 V
- JTAG signal voltage (Vref): 1.8 to 5 V, via separate Vref supply
- JTAG buffers: high-speed 24 mA three-state
- GPIO: 3 (GPIO0–GPIO2)
- Regulator: Analog Devices ADP123AUJZ linear regulator
- Mounting: surface mount (SMD), recommended at the board edge over a ground plane, keeping the area beneath the module clear
- Impedance to the FPGA: below 100 Ω for maximum JTAG speed
- Compliance: CE, EU RoHS, REACH
Typical uses
Embedded JTAG programming and debugging port on custom boards with AMD FPGAs and Zynq SoCs, OEM products and embedded systems.
Package contents
- 1 JTAG-SMT2 programming module
- USB Type-A to Micro-USB cable not included
Warnings. This item is an electronic component (part, board, module or accessory) intended for people with technical skills in electronics, for development, prototyping, education, repair and integration into other equipment. It is not a ready-to-use finished product or a toy and is not suitable for children under 14. Wiring, power supply, installation and use are the buyer's responsibility, following the manufacturer's documentation and the applicable safety rules. Anyone who integrates it into equipment placed on the market becomes its manufacturer and must ensure its conformity (CE marking under directives 2014/30/EU on electromagnetic compatibility, 2014/35/EU on low voltage and, for radio functions, 2014/53/EU). Consumer rights under Italian Legislative Decree 206/2005, including the legal guarantee of conformity, are not affected.
Secure payments: cards, Apple Pay, Google Pay, Satispay, Klarna, PayPal and bank transfer
Express courier shipping throughout Europe
Returns accepted within 14 days