eSUN PLA-CF filament Brown 1.75 mm is a PLA filled with short carbon fibres, designed for tougher parts without giving up the easy printing typical of PLA. The matt brown with its sand-textured surface gives parts a natural, refined look, ideal for visible components too.
Why choose it
- Integrated carbon fibres: short-cut fibres with organic impregnation strengthen the structure of the material.
- Greater toughness: suited to functional parts subject to loads and stress.
- Matt, sand-textured surface: a tactile effect that enhances printed parts.
- High-speed printing: good performance even with fast profiles.
- Fields of use: mechanical and chemical engineering, fittings and accessories, robots and drones, automotive, textile and aerospace.
Technical specifications
- Material: carbon fibre reinforced PLA (PLA-CF)
- Brand: eSUN
- Colour: Brown
- Finish: matt, sand texture
- Diameter: 1.75 mm
- Net weight: 1 kg
- Format: spool
- Recommended extrusion temperature: 190–230 °C
- Recommended bed temperature: 45–60 °C
- Manufacturer code: PLA-CF175C1P1
Printing tips
- Use an abrasion-resistant nozzle, such as hardened steel, to avoid wear caused by the carbon fibres.
- Find the optimum temperature within the recommended range with a test print.
- Keep the build plate clean and grease-free for good first-layer grip.
- Store the spool dry and sealed after use.
Compatibility
FDM printers using 1.75 mm filament, preferably fitted with an abrasion-resistant nozzle.
Package contents
- 1 spool of filament, 1 kg
Material for experienced users
- Abrasive material (fibre, mineral or glow-in-the-dark fillers): a hardened steel nozzle or other wear-resistant nozzle is required; a brass nozzle wears out within a few hours.
Print results
Print quality depends on the printer and its calibration, the profiles and settings used, how the filament is stored and the user's experience. The temperatures and parameters given are the manufacturer's starting values: tests and adjustments are the buyer's responsibility and at the buyer's expense. Failed prints or material used up because of unsuitable settings or hardware are not product defects.
Returns and withdrawal
The filament is vacuum-sealed because it absorbs moisture from the air. The right of withdrawal (14 days, consumers only) applies when the spool is returned with its vacuum packaging intact and sealed. An opened package can no longer be sold as new: in that case the refund is reduced by the loss in value of the product (Art. 57(2) of the Italian Consumer Code). Purchases made with a VAT number are not eligible for withdrawal. The legal warranty for defective products always applies.
Nota sulle fotoLe foto sono scattate da noi o fornite dal produttore e verificate sul prodotto reale. Il prodotto ricevuto può differire nell'aspetto (colore, marcature, confezione o lotto), mantenendo funzioni e caratteristiche tecniche dichiarate dal produttore.
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent