eSUN PLA+ filament Yellow 1.75 mm is an enhanced PLA for FDM 3D printing, stronger and tougher than conventional PLA. A bright colour for anyone who wants the easy printing of PLA with parts that are less brittle, suitable for many kinds of project.
Why choose it
- Stronger and tougher: improved physical properties compared with standard PLA make parts less prone to breaking.
- Excellent layer adhesion: layers bond well together, improving the strength of the print.
- Wide compatibility: works with most FDM 3D printers.
- Plant-based: made from starch-based raw materials sourced from renewable plant resources.
- Vacuum-sealed packaging: the filament is protected from dust, dirt and moisture.
Technical specifications
- Material: PLA+ (PLA with improved physical properties)
- Brand: eSUN
- Colour: Yellow
- Diameter: 1.75 mm
- Net weight: 1 kg
- Format: spool or refill without spool, depending on the variant
- Recommended nozzle temperature: 210–230 °C
- Bed temperature: 45–60 °C (heated bed not essential)
- Manufacturer codes: PLA+175Y1P1 (1 kg spool), PLA+175Y1R1 (1 kg refill)
Printing tips
- Print within 210–230 °C: PLA+ typically needs around 20 °C more than standard PLA.
- A heated bed is not required; if available, set it to 45–60 °C.
- If the printer will be idle for more than a few days, unload the filament from the nozzle.
- After use, return the filament to its original vacuum bag or a filament storage box and keep it in a cool, dry place.
- Secure the filament end through the holes on the spool rim to prevent tangles and ensure smooth unwinding next time.
Compatibility
FDM 3D printers using 1.75 mm filament. The refill (no spool) must be mounted on a suitable reusable spool.
Package contents
- 1 spool of 1 kg or 1 refill of 1 kg without spool, depending on the chosen variant
Print results
Print quality depends on the printer and its calibration, the profiles and settings used, how the filament is stored and the user's experience. The temperatures and parameters given are the manufacturer's starting values: tests and adjustments are the buyer's responsibility and at the buyer's expense. Failed prints or material used up because of unsuitable settings or hardware are not product defects.
Returns and withdrawal
The filament is vacuum-sealed because it absorbs moisture from the air. The right of withdrawal (14 days, consumers only) applies when the spool is returned with its vacuum packaging intact and sealed. An opened package can no longer be sold as new: in that case the refund is reduced by the loss in value of the product (Art. 57(2) of the Italian Consumer Code). Purchases made with a VAT number are not eligible for withdrawal. The legal warranty for defective products always applies.
Nota sulle fotoLe foto sono scattate da noi o fornite dal produttore e verificate sul prodotto reale. Il prodotto ricevuto può differire nell'aspetto (colore, marcature, confezione o lotto), mantenendo funzioni e caratteristiche tecniche dichiarate dal produttore.
