eSUN PLA+ filament Bone White 1.75 mm is a PLA with enhanced physical properties. It combines superior strength with easy printing. The warm, slightly ivory bone white is ideal for figures, models to be painted, prototypes and objects with a soft, natural look.
Why choose it
- Stronger and tougher: its mechanical properties exceed those of standard PLA, so prints are less prone to breaking.
- Excellent layer adhesion: layers bond well together, giving solid, compact parts.
- Heated bed optional: it can be printed without a heated bed; if one is available, a moderate temperature is enough.
- Wide compatibility: it works on most FDM 3D printers.
- Plant-based: it is produced from starch-rich raw materials derived from renewable plant sources.
- Vacuum-sealed packaging: the filament arrives sealed, shielded from dust, dirt and moisture.
Technical specifications
- Material: PLA+ (enhanced PLA)
- Brand: eSUN
- Colour: Bone White
- Diameter: 1.75 mm
- Net weight: 1 kg (all variants)
- Format: standard spool, eSpool+ spool or refill without spool, depending on the variant
- Recommended nozzle temperature: 210–230 °C (about 20 °C higher than standard PLA)
- Recommended bed temperature: 45–60 °C (heated bed not required)
- Manufacturer code: PLA+175O-BW1P1 (standard spool), PLA+175O-BW1RS1 (eSpool+ spool), PLA+175O-BW1R1 (refill)
Printing tips
- Print hotter than standard PLA, within the 210–230 °C range. Use a temperature tower to find the ideal value.
- If using a heated bed, set it to 45–60 °C and keep the surface clean for good first-layer adhesion.
- If the printer will be idle for several days, unload the filament from the nozzle.
- After use, store the filament in its original bag or a filament box in a cool, dry place. Secure the loose end in the holes on the spool rim.
- Fit the refill onto a suitable reusable spool before use.
Compatibility
FDM 3D printers using 1.75 mm filament: according to the manufacturer, PLA+ is compatible with most models.
Package contents
- 1 kg of PLA+ filament on a standard spool, on an eSpool+ spool or as a refill without spool, depending on the variant chosen
Print results
Print quality depends on the printer and its calibration, the profiles and settings used, how the filament is stored and the user's experience. The temperatures and parameters given are the manufacturer's starting values: tests and adjustments are the buyer's responsibility and at the buyer's expense. Failed prints or material used up because of unsuitable settings or hardware are not product defects.
Returns and withdrawal
The filament is vacuum-sealed because it absorbs moisture from the air. The right of withdrawal (14 days, consumers only) applies when the spool is returned with its vacuum packaging intact and sealed. An opened package can no longer be sold as new: in that case the refund is reduced by the loss in value of the product (Art. 57(2) of the Italian Consumer Code). Purchases made with a VAT number are not eligible for withdrawal. The legal warranty for defective products always applies.
Nota sulle fotoLe foto sono scattate da noi o fornite dal produttore e verificate sul prodotto reale. Il prodotto ricevuto può differire nell'aspetto (colore, marcature, confezione o lotto), mantenendo funzioni e caratteristiche tecniche dichiarate dal produttore.
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent