eSUN PLA Basic filament White 1.75 mm is a modified PLA blended with a special material that noticeably improves its flow. It is designed for printers running at high speed. Easy to handle and stable during printing, it suits decorations, concept models and rapid prototyping.
Why choose it
- Improved flow: the modified formulation moves smoothly through the hotend and keeps up with high-speed printing.
- Easy to print: an undemanding material, suitable for beginners and heavy users alike.
- Dimensional stability: it does not tend to warp during printing, helping to keep parts accurate.
- Good print quality: it delivers clean results, ideal for visible objects and models.
- Three formats: it comes on a standard spool, on an eSpool+ spool or as a refill without spool.
Technical specifications
- Material: modified PLA
- Brand: eSUN
- Colour: White
- Diameter: 1.75 mm
- Net weight: 1 kg (all variants)
- Format: standard spool, eSpool+ spool or refill without spool, depending on the variant
- Recommended nozzle temperature: 210–230 °C
- Recommended bed temperature: 45–60 °C
- Manufacturer code: PLA-Basic175W1P1 (standard spool), PLA-Basic175W1RS1 (eSpool+ spool), PLA-Basic175W1R1 (refill)
Printing tips
- Start within the 210–230 °C range. Print a temperature tower to find the best value for the printer and chosen speed.
- Set the bed to 45–60 °C and keep it clean for good first-layer adhesion.
- For high-speed printing, use a suitable printer profile and make sure part cooling is adequate.
- Store the filament dry, in a resealable bag or filament box, when not in use.
- Fit the refill onto a suitable reusable spool before use.
Compatibility
FDM printers using 1.75 mm filament. The manufacturer lists compatibility with the Bambu Lab AMS with a qualifying note, so check it for the format chosen.
Print results
Print quality depends on the printer and its calibration, the profiles and settings used, how the filament is stored and the user's experience. The temperatures and parameters given are the manufacturer's starting values: tests and adjustments are the buyer's responsibility and at the buyer's expense. Failed prints or material used up because of unsuitable settings or hardware are not product defects.
Returns and withdrawal
The filament is vacuum-sealed because it absorbs moisture from the air. The right of withdrawal (14 days, consumers only) applies when the spool is returned with its vacuum packaging intact and sealed. An opened package can no longer be sold as new: in that case the refund is reduced by the loss in value of the product (Art. 57(2) of the Italian Consumer Code). Purchases made with a VAT number are not eligible for withdrawal. The legal warranty for defective products always applies.
Nota sulle fotoLe foto sono scattate da noi o fornite dal produttore e verificate sul prodotto reale. Il prodotto ricevuto può differire nell'aspetto (colore, marcature, confezione o lotto), mantenendo funzioni e caratteristiche tecniche dichiarate dal produttore.
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent