Elegoo PLA filament Beige 1.75 mm is a polylactic acid filament that also suits newcomers to 3D printing. It melts at a low temperature and shows minimal warping. It produces accurate parts with a glossy surface in a warm, natural shade.
Why choose it
- Easy to print: the low melting temperature and broad printer compatibility keep things simple.
- Minimal warping: the material has very little tendency to deform as it cools.
- Consistent diameter: the tolerance is ± 0.02 mm, checked continuously during production using a range of test methods.
- Hand-checked winding: this reduces the risk of filament breakage and helps ensure smooth extrusion.
- Dried and vacuum-sealed: each spool is dried again before packing. This gives bubble-free prints and a lower risk of clogging.
- Odourless printing and glossy finish: printing produces no odour and surfaces come out glossy and neat.
Technical specifications
- Material: PLA (polylactic acid)
- Brand: Elegoo
- Colour: Beige
- Diameter: 1.75 mm
- Tolerance: ± 0.02 mm
- Net weight: 1 kg
- Format: spool
- Printing temperature: 190–230 °C
- Bed temperature: 0–40 °C
- Finish: glossy
- Compatibility: Bambu Lab AMS
- Manufacturer code: 50.203.0168
Printing tips
- Start in the middle of the recommended temperature range, then fine-tune with a temperature tower.
- Leave the bed unheated or keep it slightly warm, within the stated range.
- Clean and degrease the build plate for good first-layer adhesion.
- Once opened, store the spool in a dry place, ideally in a sealed bag with desiccant.
Compatibility
Suitable for FDM 3D printers using 1.75 mm filament. Listed as compatible with the Bambu Lab AMS multi-material system.
Package contents
- 1 vacuum-sealed spool of PLA filament, 1 kg
Print results
Print quality depends on the printer and its calibration, the profiles and settings used, how the filament is stored and the user's experience. The temperatures and parameters given are the manufacturer's starting values: tests and adjustments are the buyer's responsibility and at the buyer's expense. Failed prints or material used up because of unsuitable settings or hardware are not product defects.
Returns and withdrawal
The filament is vacuum-sealed because it absorbs moisture from the air. The right of withdrawal (14 days, consumers only) applies when the spool is returned with its vacuum packaging intact and sealed. An opened package can no longer be sold as new: in that case the refund is reduced by the loss in value of the product (Art. 57(2) of the Italian Consumer Code). Purchases made with a VAT number are not eligible for withdrawal. The legal warranty for defective products always applies.
Nota sulle fotoLe foto sono scattate da noi o fornite dal produttore e verificate sul prodotto reale. Il prodotto ricevuto può differire nell'aspetto (colore, marcature, confezione o lotto), mantenendo funzioni e caratteristiche tecniche dichiarate dal produttore.
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent