Bambu Lab PLA Translucent filament Orange 1.75 mm is a translucent PLA with a frosted-glass finish, made for prints that play with light. It suits lampshades, vases and decorative pieces that give off a soft, even glow when lit.
Why choose it
- Frosted-glass effect: the frosted surface diffuses light gently and gives prints a refined, handcrafted look.
- Sturdier than classic clear PLA: tougher, longer-lasting and more resistant to light exposure.
- Easy to print: handles like standard PLA, with wide nozzle and bed temperature ranges.
- Combines with all PLA: translucent and opaque parts can be mixed in the same multicolour print.
- RFID for the AMS: print settings are stored in the RFID tag and read automatically by the AMS.
Technical specifications
- Material: translucent PLA (PLA Translucent)
- Brand: Bambu Lab
- Colour: Orange
- Finish: translucent, frosted
- Diameter: 1.75 mm
- Net weight: 1 kg
- Recommended nozzle temperature: 200–240 °C
- Recommended bed temperature: 35–65 °C
- Format: Basic Reusable Spool
- Identification: RFID tag with print settings
- Manufacturer code: A17-A0-1.75-1000-SPL
Printing tips
- With the AMS, the settings are applied automatically from the RFID tag. On other setups, stay within the stated temperature ranges.
- For lampshades and vases, use thin walls or vase mode to enhance the translucent effect and light diffusion.
- Keep the build plate clean and grease-free for an even first layer.
- For illuminated objects, use low-heat LED light sources, as PLA tends to soften with heat.
- When not in use, store the filament dry in a sealed container with desiccant.
Compatibility
FDM printers using 1.75 mm filament. Compatible with the Bambu Lab AMS multi-material system, which reads the print settings automatically via RFID.
Package contents
- 1 spool of filament, 1 kg (Basic Reusable Spool)
Print results
Print quality depends on the printer and its calibration, the profiles and settings used, how the filament is stored and the user's experience. The temperatures and parameters given are the manufacturer's starting values: tests and adjustments are the buyer's responsibility and at the buyer's expense. Failed prints or material used up because of unsuitable settings or hardware are not product defects.
Returns and withdrawal
The filament is vacuum-sealed because it absorbs moisture from the air. The right of withdrawal (14 days, consumers only) applies when the spool is returned with its vacuum packaging intact and sealed. An opened package can no longer be sold as new: in that case the refund is reduced by the loss in value of the product (Art. 57(2) of the Italian Consumer Code). Purchases made with a VAT number are not eligible for withdrawal. The legal warranty for defective products always applies.
Nota sulle fotoLe foto sono scattate da noi o fornite dal produttore e verificate sul prodotto reale. Il prodotto ricevuto può differire nell'aspetto (colore, marcature, confezione o lotto), mantenendo funzioni e caratteristiche tecniche dichiarate dal produttore.
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent