Bambu Lab PLA Tough+ filament White 1.75 mm, 1 kg spool

Bambu Lab PLA Tough+ filament White 1.75 mm is a high-strength PLA for durable parts without the printing hassles of ABS. It combines ABS-like toughness with the easy handling of PLA. It suits functional components exposed to impacts, drops and repeated bending.

Why choose it

• ABS-like toughness: suited to functional parts and mechanical prototypes, without the difficulties of printing ABS.
• Stronger layer adhesion: up to twice that of conventional PLA, for solid parts that are less prone to delamination.
• Impact and flex resistance: parts withstand bending and knocks without snapping.
• Dependable results: clean prints even on intricate shapes and on parts under cyclic loads.
• RFID for the AMS: print settings are stored in the RFID tag and read automatically by the AMS.

Technical specifications

• Material: PLA Tough+ (high-strength PLA)
• Brand: Bambu Lab
• Colour: White
• Diameter: 1.75 mm
• Net weight: 1 kg
• Recommended nozzle temperature: 245 °C
• Recommended bed temperature: 55 °C
• Format: Basic Reusable Spool or refill without spool, depending on the variant
• Identification: RFID tag with print settings
• Manufacturer code: A10-W0-1.75-1000-SPL (spool), A10-W0-1.75-1000-SPLFREE (refill)

Printing tips

• Print in a well-ventilated room, as recommended by Bambu Lab.
• With the AMS, the settings load from the RFID tag. On other setups, start from 245 °C nozzle and 55 °C bed.
• Keep the build plate clean and grease-free for good first-layer adhesion.
• When not in use, store the filament dry in a sealed container with desiccant.

Compatibility

FDM printers using 1.75 mm filament. Compatible with the Bambu Lab AMS multi-material system, which reads the print settings automatically via RFID. The refill version comes without a spool and must be fitted to a reusable spool for use.

Package contents

• 1 kg of filament, depending on the chosen variant: on a Basic Reusable Spool or as a refill without spool