Bambu Lab PLA Pure filament Milky Pink 1.75 mm is a PLA with a minimal formulation of five components, all tested to EU standards. The milky pastel pink is ideal for decorative pieces, printed gifts and home accessories. Strength and ease of printing match those of PLA Basic.
Why choose it
- Five ingredients in total: PLA from corn and sugar cane, acrylic copolymer, colour pigments, ethylene bis-stearamide (EBS) and asbestos-free talc.
- Components tested one by one: the manufacturer provides documentation for each raw material.
- No compromise on performance: mechanical properties are comparable to Bambu PLA Basic, with layer adhesion similar to common PLA filaments.
- Less stringing, neater surfaces: even without drying, stringing is much lower than with typical third-party PLA.
- UL GREENGUARD 2904: certified to the standard for 3D printer emissions.
- Settings via RFID: parameters are read automatically by the AMS.
Technical specifications
- Material: PLA
- Composition: PLA from corn and sugar cane, acrylic copolymer, pigments, EBS, asbestos-free talc
- Brand: Bambu Lab
- Colour: Milky Pink
- Diameter: 1.75 mm
- Net weight: 1 kg
- Format: spool
- Recommended nozzle temperature: 190–230 °C
- Recommended bed temperature: 35–45 °C
- Compatibility: Bambu Lab AMS
- Certification: UL GREENGUARD 2904
- Manufacturer documentation: technical data sheet, RoHS report, EU 10/2011 and EN 71-3 reports. The certifications refer to the raw materials, not to the printed part.
- Manufacturer code: A19-P00-1.75-1000-SPL
Printing tips
- Set temperatures within the stated ranges, starting from the parameters read via RFID.
- Keep the build plate clean for an even, well-bonded first layer.
- Store the spool dry when not in use to preserve its quality.
- Take care of part cooling, as with any PLA, for crisper details.
Compatibility
FDM printers using 1.75 mm filament. The filament is compatible with the Bambu Lab AMS.
Package contents
- 1 spool of Milky Pink PLA Pure filament, 1 kg
Print results
Print quality depends on the printer and its calibration, the profiles and settings used, how the filament is stored and the user's experience. The temperatures and parameters given are the manufacturer's starting values: tests and adjustments are the buyer's responsibility and at the buyer's expense. Failed prints or material used up because of unsuitable settings or hardware are not product defects.
Returns and withdrawal
The filament is vacuum-sealed because it absorbs moisture from the air. The right of withdrawal (14 days, consumers only) applies when the spool is returned with its vacuum packaging intact and sealed. An opened package can no longer be sold as new: in that case the refund is reduced by the loss in value of the product (Art. 57(2) of the Italian Consumer Code). Purchases made with a VAT number are not eligible for withdrawal. The legal warranty for defective products always applies.
Nota sulle fotoLe foto sono scattate da noi o fornite dal produttore e verificate sul prodotto reale. Il prodotto ricevuto può differire nell'aspetto (colore, marcature, confezione o lotto), mantenendo funzioni e caratteristiche tecniche dichiarate dal produttore.
