Foto nostre o del produttore, verificate sul prodotto reale. L'aspetto può variare, funzioni e caratteristiche tecniche no.
Prop-Maker FeatherWing: NeoPixel output, 3 W RGB LED driver, LIS3DH accelerometer, audio amplifier – Adafruit 3988
FeatherWing for building sabers, props, toys and cosplay pieces: NeoPixel port, 3 W RGB LED driver, accelerometer with tap detection and class D audio amplifier.
Key features
- NeoPixel port with 3-pin JST connector for JST-wired NeoPixel strips or addressable LEDs, powered from the LiPo battery or USB (whichever is higher), with level shifter for a clean signal
- 3 W RGB LED driver with 3 high-current MOSFETs; on most Feathers the 3 pins are PWM capable for any colour; pin breakouts plus strain-relief holes
- LIS3DH triple-axis accelerometer with tap detection, to detect motion, tilt and hits
- Class D audio amplifier for an 8 Ω 1 W or 4 Ω 3 W speaker, connectable with a PicoBlade cable; requires a Feather with analog audio output (e.g. Feather M0 Express or M4 series)
- Low power mode: one pin cuts power to the RGB LED, NeoPixels and amplifier; with the pin low the wing draws under 1 mA
- Breakouts with strain-relief holes for a power switch (enable pin and ground) and for an external mode button
- Code for Arduino and CircuitPython
Technical specifications
- NeoPixel output: 3-pin JST connector with level shifter
- LED driver: 3 MOSFET channels for a 3 W RGB LED
- Accelerometer: LIS3DH triple-axis with tap detection
- Amplifier: class D, 8 Ω 1 W or 4 Ω 3 W
- Standby current: under 1 mA
- Recommended Feathers: Feather M0 Express, M4 and ESP32 series (with Feather 32u4, 328P, nRF52 and ESP8266 some features, such as audio, are not available)
- Form factor: FeatherWing
- Dimensions: 50.8 × 22.8 × 7.2 mm
- Weight: 4.8 g
Typical uses
Light sabers and glowing swords, props, cosplay, interactive toys and accessories with lights, sound and motion sensing.
Package contents
- 1 × Prop-Maker FeatherWing, assembled
- Header to solder for connecting to the Feather
- Feather board, speaker, LEDs and NeoPixel strips not included
Warnings. This item is an electronic component (part, board, module or accessory) intended for people with technical skills in electronics, for development, prototyping, education, repair and integration into other equipment. It is not a ready-to-use finished product or a toy and is not suitable for children under 14. Wiring, power supply, installation and use are the buyer's responsibility, following the manufacturer's documentation and the applicable safety rules. Anyone who integrates it into equipment placed on the market becomes its manufacturer and must ensure its conformity (CE marking under directives 2014/30/EU on electromagnetic compatibility, 2014/35/EU on low voltage and, for radio functions, 2014/53/EU). Consumer rights under Italian Legislative Decree 206/2005, including the legal guarantee of conformity, are not affected.
Secure payments: cards, Apple Pay, Google Pay, Satispay, Klarna, PayPal and bank transfer
Express courier shipping throughout Europe
Returns accepted within 14 days